I-Weld-On-Hubs, Uhlobo W, WH,WM nge-C20 Material

I-Weld-On-Hubs, Uhlobo W, WH,WM ngesithombe esifakiwe se-C20

I-Taper Bore Weld-on-Hubs yenziwe ngensimbi, yabholwa, ithephwe kanye ne-taper bored ukuthola ama-Taper Bushes ajwayelekile.I-flange enwetshiwe inikeza izindlela ezilula zokushisela ama-hubs kuma-fan rotor, ama-pulleys ensimbi, amapuleti ama-sprocket, ama-impeller, ama-agitator namanye amadivaysi amaningi okumele aboshwe ngokuqinile ku-shaft.

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

I-Weld-on-Hubs
I-Taper Bore Weld-on-Hubs yenziwe ngensimbi, yabholwa, ithephwe kanye ne-taper bored ukuthola ama-Taper Bushes ajwayelekile.I-flange enwetshiwe inikeza izindlela ezilula zokushisela ama-hubs kuma-fan rotor, ama-pulleys ensimbi, amapuleti ama-sprocket, ama-impeller, ama-agitator namanye amadivaysi amaningi okumele aboshwe ngokuqinile ku-shaft.I-Weld-on-Hubs kulula ukuyifaka futhi ifaneleka ngokuphelele ukusetshenziswa lapho izimo zokusebenza ezinzima zifinyelelwa khona.Ukuqinisa ama-xcrews kufinyeza i-bore yehlathi, ngaleyo ndlela ibheke ku-shaft ngokulingana kwe-press fit .Lolu hlobo lokwakha luqeda ubunzima obukhulayo, luphinde luvimbele ukuxegisa nokugqoka ku-hub ngesikhathi sokusebenza.Ama-Weld-on-Hubs akhiqizwa ukuze ahambisane ne-Taper Bush range futhi afaka phakathi i-W, WG, WH, WHG, WM kanye ne-WMG Taper Bore Hubs.Zonke zenziwa ngokwezinga lomhlaba kusetshenziswa insimbi ye-C20.

W Weld-on-Hubs

Ihabhu Ireferensi	Usayizi Bush	A	B	C	D	E	F	Fl	X
W12	1215	73.03	63.50	62.71	38.10	15.88	9.53	-	-
W16	1615	82.55	73.03	72.24	38.10	15388	9.53	-	-
W25	2517	127.00	111.13	110.34	44.45	19.05	12.70	-	-
WG30	3030	149.86	133.35	132.56	76.20	25.40	19.05	23	23
WG35	3535	184.15	158.75	157.96	88.90	31.75	25.04	30	30
WG40	4040	225.43	169.85	196.06	101.60	31.75	31.75	34	34
WG45	4545	254.00	222.25	221.46	114.30	38.10	38.10	38	38
WG50	5050	267.00	241.00	240.25	127.00	38.10	38.10	42	42
WG60	6060	375.00	343.00	342.00	127.00	38.10	38.10	42	42
WG70	7060	425.00	375.00	374.00	153.00	51.00	51.00	51	51
WG80	8065	445.00	349.0	393.00	165.00	51.00	51.00	55	55
WG100	10085	559.00	495.00	494.00	216.00	51.00	51.00	72	72

"G": isizwe simele ukukhululeka kokushisela

I-Weld-on-Hubs
I-WH Weld-on-Hubs

I-Hub Reference	Usayizi Bush	A	B	C	D	E	F	Fl X
WH12	1210	70	65	64.5	25	9	10	-	-
WH16-1	1610	80	75	74.5	25	9	10	-	-
WH20	2012	95	90	89.5	32	12	12	-	-
WH25	2517	115	110	109.5	44	19	15	-	-
WHG30-2	3020	145	140	139.5	50	20	15	17	17
WHG35	3525	190	180	179.5	65	25	25	22	22
WHG40-1	4030	200	190	189.0	76	32	30	25	25
I-WHG40-2	4040	200	190	189.0	101	32	30	34	34
WHG45-1	4535	210	200	199.5	89	40	30	30	30
WHG45-2	4545	210	200	199.5	114	40	30	38	38
WHG50-1	5040	230	220	219.5	102	40	35	34	34
WHG50-2	5050	230	220	219.5	127	40	35	42	42

"GH": isizwe simelela impumuzo yokushisela

I-WMG Weld-on-Hub

I-Hub Reference	Usayizi Bush	A	B	C	D	E	F	Fl	X
I-WMG12	1210	70	60	58	26	9	10	9	9
I-WMG16-1	1610	83	70	68	26	9	10	9	9
I-WMG16-1	1615	83	70	68	38	16	11	13	13
I-WMG20	2012	95	90	88	32	12	12	11	11
I-WMG25	2517	127	110	108	44	19	13	15	15
I-WMG30-2	3020	150	130	125	50	20	15	17	17
I-WMG30-3	3030	150	130	125	76	25	19	25	25
I-WMG35	3535	184	155	151	89	32	25	30	30
I-WMG40	4040	225	195	187	102	32	32	34	34
I-WMG45	4545	254	220	213	114	38	38	38	38
I-WMG50	5050	276	242	228	127	38	38	42	42

Ama-weld-on-hubs enziwe ngensimbi ye-C20 futhi abhobolwe, athephwe futhi afakwe ikhoneni ukuze kufakwe izihlahla zokukhiya ezicijile.Angasetshenziselwa ukushisela ama-pulleys, ama-sprockets, ama-couplings, ama-fan rotor, amasondo amabhande, njll. Lezi zingxenye kufanele zifakwe ngokuphephile ku-shafting.Izinhlobo ezine zama-weld-on-hubs ziyatholakala eshalofini.Uhlobo:W, WG, WH, WHG, WM, WMG taper bore hubs.

Okwedlule: I-HRC Couling Complete Set Type F/H/B whith Rubber Spider, HRC70~HRC280

Olandelayo: I-Bolt-On-Hubs, Uhlobo SM, BF nge-GG22 Cast Iron

Bhala umyalezo wakho lapha futhi usithumelele wona